2010 Dodge Nitro Owner Manual - Page 31

30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. The doors were not previously locked using the power 3. Press the power door LOCK switch to lock the doors. door lock switch or Remote Keyless Entry (RKE) 4. A single chime will indicate the completion of the transmitter. programming. Automatic Door Locks Programming 5. Repeat these steps if you want to return this feature to The automatic door locks feature can be enabled or its previous setting. disabled as follows: NOTE: Use the automatic door locks feature in accorFor vehicles equipped with an Electronic Vehicle Infordance with local laws. mation Center (EVIC), refer to "Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer- Automatic Unlock Doors on Exit Programmable Features)" in "Understanding Your The doors will unlock automatically on vehicles with power door locks if: Instrument Panel" for further information. For vehicles not equipped with the EVIC, perform the 1. The automatic unlock doors on exit feature is enabled. following procedure: 2. The transmission was in gear and the vehicle speed returned to 0 mph (0 km/h). 1. Close all doors and place the key in the ignition. 2. Cycle the ignition switch between LOCK and ON and 3. The transmission is in NEUTRAL or PARK. then back to LOCK four times, ending up in the LOCK 4. The driver door is opened. position.