2010 Dodge Nitro Owner Manual - Page 211

210 UNDERSTANDING YOUR INSTRUMENT PANEL • Magnetic materials should be kept away from the top reset button (for approximately ten seconds) until the of the right rear quarter window. This is where the current variance zone number is displayed. To change the zone, press and release the CMTC reset button to increase compass sensor is located. the variance one step. Repeat as necessary until the desired variance is achieved. NOTE: The factory default zone is 8. During programming, the zone value will wrap around from zone 15 to zone 1. Manual Compass Calibration If the compass appears erratic inaccurate or abnormal, you may wish to calibrate the compass. Prior to calibrating the compass, make sure the proper zone is selected. 1. Start the engine and leave the transmission in the PARK position. Compass Variance Map 2. Press and hold the CMTC reset button (for approxiTo Set the Variance Start the engine and leave the transmission gear selector mately 10 seconds) until the current variance zone numlever in the PARK position. Press and hold the CMTC ber is displayed.