2013 Dodge Avenger Owner Manual - Page 222

220 UNDERSTANDING YOUR INSTRUMENT PANEL the oil change indicator system (after performing the 15. Cruise Indicator - If Equipped scheduled maintenance) perform the following procedure: This indicator shows that the Electronic Speed 1. Turn the ignition switch to the ON/RUN position (do Control System is ON. not start the engine). 16. Odometer/Trip Odometer Reset Button 2. Fully depress the accelerator pedal slowly 3 times Trip Odometer within 10 seconds. Press and release this button to change the display from 3. Turn the ignition switch to the LOCK position. odometer to "Trip A." Press and release it a second time NOTE: If the indicator message illuminates when you to change the display to "Trip B." Press and release it a start the vehicle, the oil change indicator system did not third time to change the display back to the odometer. reset. If necessary, repeat this procedure. To reset the trip odometer, first display the trip mileage 4. For vehicles equipped with the Electronic Vehicle that you want to reset, "Trip A" or "Trip B." Then push Information Center (EVIC), refer to "Electronic Vehicle and hold the button (approximately two seconds) until the display resets to 0 miles (km). The odometer must be Information Center (EVIC)". in Trip Mode to reset the trip odometer.