2013 Dodge Avenger Owner Manual - Page 90

88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) seat belt for installing child seats in the outboard positions. Please refer to "Installing The LATCHCompatible Child Restraint System" for typical installation instructions. 2. Loosen the adjusters on the lower straps and on the tether strap of the child seat so that you can more easily attach the hooks or connectors to the vehicle anchorages. 3. Place the child seat between the lower anchorages for that seating position. For some second row seats, you may need to recline the seat and / or raise the head Always follow the directions of the child restraint manurestraint to get a better fit. facturer when installing your child restraint. Not all child restraint systems will be installed as described here. 4. Attach the lower hooks or connectors of the child restraint to the lower anchorages in the selected seatTo Install A LATCH-compatible Child Restraint ing position. 1. If the selected seating position has a Switchable Automatic Locking Retractor (ALR) seat belt, stow the seat 5. If the child restraint has a tether strap, connect it to the top tether anchorage. See the section "Installing Child belt, following the instructions below. See the section Restraints Using the Top Tether Anchorage" for direc"Installing Child Restraints Using the Vehicle Seat tions to attach a tether anchor. Belt" to check what type of seat belt each seating position has.