2013 Dodge Avenger Owner Manual - Page 464

462 MAINTAINING YOUR VEHICLE Let soak for approximately one hour. After one hour pull the liner from the water and dip it back into the water Do not bleach, dye, or clean the belts with chemical about six times. This will loosen any remaining debris. solvents or abrasive cleaners. This will weaken the fabric. Rinse the liner thoroughly under warm running water. Sun damage can also weaken the fabric. Shake the excess water from the liner and dry the outer If the belts need cleaning, use MOPAR® Total Clean, a mild surfaces with a clean soft cloth. soap solution, or lukewarm water. Do not remove the belts Installation from the vehicle to wash them. Dry with a soft cloth. Align the liner in the cupholder and press down firmly. Replace the belts if they appear frayed or worn or if the buckles do not work properly. FUSES Cleaning Center Console Cupholders Integrated Power Module Seat Belt Maintenance Removal The Integrated Power Module is located in the engine Grab the rubber portion of the cupholder and lift upward. compartment near the air cleaner assembly. This center contains cartridge fuses and mini fuses. A label that Cleaning identifies each component may be printed on the inside Soak the rubber cupholder liner in a mixture of medium of the cover. Refer to the graphic below for FUSES/TIPM hot tap water and one teaspoon of mild liquid dish soap. location.