2013 Dodge Avenger Owner Manual - Page 370

368 STARTING AND OPERATING If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the "Tire Pressure Monitoring Telltale Light" will no longer flash, and the ЉCHECK TPM SYSTEMЉ message will no longer display, and a pressure value will display in place of the dashes. A system fault can occur due to any of the following: 4. Using tire chains on the vehicle. 5. Using wheels/tires not equipped with TPM sensors. The EVIC will also display a ЉCHECK TPM SYSTEMЉ message for a minimum of five seconds when a system fault related to an incorrect sensor location fault is detected. In this case, the ЉCHECK TPM SYSTEMЉ message is then followed with a graphic display with pres1. Jamming due to electronic devices or driving next to sure values still shown. This indicates that the pressure facilities emitting the same Radio Frequencies as the values are still being received from the TPM sensors but TPM sensors. they may not be located in the correct vehicle position. 2. Installing some form of aftermarket window tinting The system still needs to be serviced as long as the that affects radio wave signals. ЉCHECK TPM SYSTEMЉ message is displayed. 3. Lots of snow or ice around the wheels or wheel housings.