2004 Ford Explorer Sport Trac Owner Guide 3rd Printing (Spanish) - Page 295

Lights PANEL DIMMER CONTROL Move the control up and down to adjust the intensity of the panel lighting. Operates only when the exterior lights are switched on. Move the control to the full upright position (past detent) to turn on the interior lamps. Move the control to the full down position (past detent) to prevent interior lamps from illuminating when the doors are opened (if equipped). Note: On some models, when the instrument panel dimmer switch is rotated all the way up (past the detent), turning on the interior dome lamp, the exterior rear cargo lamp is also turned on. AIMING THE HEADLAMPS The headlamps on your vehicle are properly aimed before leaving the assembly plant. If your vehicle is involved in an accident or if you have problems fixing the alignment of your headlamps, have them checked by a qualified service technician. Headlamp aim adjustment The headlamps on your vehicle can only be vertically adjusted. Your vehicle does not require horizontal aim adjustments. To adjust the headlamps: 1. Park your vehicle on a level surface about 7.6 meters (25 feet) away from a vertical plain surface (3). Check your headlamp alignment at night or in a dark area so that you can see the headlamp beam pattern. • (1) Eight feet • (2) Center height of lamp to ground • (3) Twenty-five feet • (4) Horizontal reference line 37