2012 Jeep Grand Cherokee Owner Manual - Page 418

416 STARTING AND OPERATING CAUTION! (Continued) • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift from REVERSE, PARK, or NEUTRAL into any forward gear when the engine is above idle speed. • Before shifting into any gear, make sure your foot is firmly on the brake pedal. Do not press the accelerator. Use the Fob with Integrated Key to briefly turn the ignition switch to the START position and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage automatically when the engine is running. If the engine fails to start, the starter will disengage automatically in 10 seconds. If this occurs, turn the ignition switch to the LOCK position, wait 10 to 15 seconds, then repeat the "Normal Starting" procedure. Keyless Enter-N-Go This feature allows the driver to operate the ignition switch with the push of a button, as long as the ENGINE Using Fob With Integrated Key (Tip Start) START/STOP button is installed and NOTE: Normal starting of either a cold or a warm the Remote Keyless Entry (RKE) transengine is obtained without pumping or pressing the mitter is in the passenger compartaccelerator pedal. ment.