2012 Jeep Grand Cherokee Owner Manual - Page 92

90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE the upward position. To access the center seat arm rest tether first lower the arm rest. The tether is located 1. To install a child restraint with ALR, first, pull enough behind the armrest and hooked onto the plastic seat of the seat belt webbing from the retractor to route it backing. through the belt path of the child restraint. Slide the latch plate into the buckle until you hear a "click." Next, extract all the seat belt webbing out of the retractor and then allow the belt to retract into the retractor. As the belt retracts, you will hear a ratcheting sound. This indicates the safety belt is now in the Automatic Locking mode. Installing a Child Restraint with an ALR: 2. Finally, pull on any excess webbing to tighten the lap portion around the child restraint. Any seat belt system will loosen with time, so check the belt occasionally, and pull it tight if necessary. To attach a child restraint tether strap: For rearward facing infant seats secured in the center seat position with the vehicle seat belts, the rear center seat position has an armrest tether that secures the arm rest in Center Seat Position Arm Rest Tether