2012 Jeep Grand Cherokee Owner Manual - Page 446

444 STARTING AND OPERATING NOTE: Refer to "Selec-Terrain௡ - If Equipped" in "Start- Shifting Procedures ing and Operating" for further information on the vari4WD HI To 4WD LOW ous positions and their intended usages. With the vehicle at speeds of 0 to 3 mph (0 to 5 km/h), the NEUTRAL ignition switch in the ON position or the engine running, This range disengages both the front and rear driveshafts shift the transmission into NEUTRAL, and press the from the powertrain. It is to be used for flat towing "4WD LOW" button once on the transfer case switch. The behind another vehicle. Refer to "Recreational Towing" "4WD LOW" indicator light in the instrument cluster in "Starting and Operating" for further information. will begin to flash and remain on solid when the shift is complete. 4WD LOW This range is for low speed four-wheel drive. It locks the front and rear driveshafts together and forces the front and rear wheels to rotate at the same speed. It provides additional traction and maximum pulling power for loose, slippery road surfaces only. Do not exceed 25 mph (40 km/h). NOTE: Refer to "Selec-Terrain௡ - If Equipped" for further information on the various positions and their intended usages.