2012 Jeep Grand Cherokee Owner Manual - Page 479

STARTING AND OPERATING 477 The HDC speed may be adjusted by the driver to suit the driving conditions. The speed corresponds to the transmission gear selected. HDC operation can be overridden with brake application to slow the vehicle down below the HDC control speed. Conversely, if more speed is desired during HDC control, the accelerator pedal will increase vehicle speed in the usual manner. When either the brake or the accelerator is released, HDC will control the vehicle back to the original set speed. Hill Descent Switch 5 When HDC is enabled, the HDC icon will be illuminated in the instrument cluster. HDC will automatically apply the brakes to control downhill speed to the selected level when necessary on grades greater than approximately 8%. It will usually not activate on level ground. HDC Operation In 4WD Low Range To enable HDC, press the HDC switch or put the Selec-Terrain™ system in the "ROCK" mode. The HDC icon will be illuminated in the instrument cluster and HDC will function. If the vehicle speed goes above 20 mph (32 km/h), the HDC icon will flash and HDC will not function. To disable HDC, press the HDC switch.