2012 Jeep Grand Cherokee Owner Manual - Page 456

454 STARTING AND OPERATING Operation The indicator lamps 3 through 6 will illuminate to show the current position of the vehicle. Flashing indicator lamps will show a position which the system is working to achieve. When raising, if multiple indicator lamps are flashing on the "Up" button, the highest flashing indicator lamp is the position the system is working to achieve. When lowering, if multiple indicators are flashing on the ЉUpЉ button the lowest solid indicator lamp is the position the system is working to achieve. Pressing the "DOWN" button once will move the suspension one position lower from the current level, assuming all conditions are met (i.e. engine running, doors closed, speed below threshold, etc). The "DOWN" button can be pressed multiple times. Each press will lower the requested level by one position down to a minimum of Park Mode or the lowest position allowed based on current conditions (i.e. vehicle speed, etc.) Automatic height changes will occur based on vehicle speed and the current vehicle height. The indicator lamps Pressing the "UP" button once will move the suspension and EVIC messages will operate the same for automatic one position higher from the current position, assuming changes and user requested changes. all conditions are met (i.e. engine running, speed below • Off-Road 2 (OR2) - Indicator lamps 4, 5, and 6 will be threshold, etc). The "UP" button can be pressed multiple illuminated when the vehicle is in OR2. times, each press will raise the requested level by one position up to a maximum position of OR2 or the highest • Off-Road 1 (OR1) - Indicator lamps 4 and 5 will be illuminated when the vehicle is in OR1. position allowed based on current conditions (i.e. vehicle speed, etc).