2012 Jeep Grand Cherokee Owner Manual - Page 88
2012 Jeep Grand Cherokee Manual
Page 88 highlights
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The rear outboard seating positions have lower anchorages capable of accommodating LATCH-compatible child seats having flexible, webbing-mounted lower attachments and child seats with fixed lower attachments. The rear seat lower anchors can be readily identified by the symbol located on the seatback directly above the anchorages and are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the intersection of the seatback and seat cushion surfaces. The vehicle's seat belt must be used for the center position. Regardless of the specific type of lower attachment, never install LATCHcompatible child seats such that two seats share a common lower anchorage. center position. If your child restraints are not LATCHcompatible, you can only install the child restraints using the vehicle's seat belts. For typical installation instructions, refer to "Installing The LATCH-Compatible Child Restraint System". Installing The LATCH-Compatible Child Restraint System We urge you to carefully follow the directions of the manufacturer when installing your child restraint. Not all child restraint systems will be installed as described here. Again, carefully follow the installation instructions that were provided with the child restraint system. The rear seat lower anchorages are round bars, located at the rear of the seat cushion where it meets the seatback, and are just visible when you lean into the rear seat to If you are installing LATCH-compatible child restraints install the child restraint. You will easily feel them if you in adjacent rear seating positions, you can use the run your finger along the intersection of the seatback and LATCH anchors or the vehicle's seat belt for the outboard seat cushion surfaces. position, but you must use the vehicle's seat belt at the