Acer Altos G530 Altos G530 User's Guide - Page 145

135 Error message Static Resource Conflict PCI I/O conflict PCI ROM conflict PCI IRQ conflict PCI IRQ routing table error Timer Error Interrupt Controller-1 error Interrupt Controller-2 error CMOS BIOS message CMOS Date/Time Not Set CMOS Battery Low CMOS Settings Wrong CMOS Checksum Bad USB BIOS error messages Warning! Unsupported USB device found and disabled! Warning! Port 60h/64h emulation is not supported by this USB Host Controller! Description Two or more Static Devices are trying to use the same resource space (usually Memory or I/O). An I/O resource conflict was detected. Unable to route an IRQ to the PCI device. An error occurred while programming the count register of channel 2 of the 8254 timer. The Master Interrupt Controller could not be initialized. The Slave Interrupt Controller could not be initialized. The date and/or time values stored in the CMOS are invalid. Run Setup to set correct values. The battery maybe losing power. Replace the battery soon. CMOS values are not the same as the last boot. These values have either been corrupted or the battery has failed. The CMOS checksum is incorrect. CMOS memory may have been corrupted. Run Setup to reset values. A non-bootable USB device is enumerated and disabled. The port 60h/64h emulation mode cannot be enabled for this USB host controller.