Acer Altos G530 Altos G530 User's Guide - Page 74

Upgrading the system memory, Memory module installation guidelines - memory upgrade

Get Acer Altos G530 PDF manuals and user guides View all Acer Altos G530 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 74 highlights

64 3 System upgrade Upgrading the system memory This section includes instructions for removing and installing a memory module. Altos G530 has four DDR2-400 DIMM slots. Each slot supports 512 MB, 1GB or 2GB memory modules. The maximum memory capacity is 8GB. Memory module installation guidelines • The minimum memory configuration is one DIMM, installed in the DIMM 1B socket (the socket farthest from the CPU sockets). However, for optimum performance and dual-channel interleave operation, a minimum of two DIMMs should be installed. DIMMs on channel A (DIMM 1A and 2A) are paired with DIMMs on channel B (DIMM 1B and 2B) to enable 2-way interleaving. Note: Dual-channel memory requires symmetrical memory modules using the same density (e.g. 512 MB), bus width (e.g. x8, x16) and granule technology (e.g. 512M-bit). • Populate both DIMMs in bank 1 (DIMM 1B and 1A) first, before populating DIMMs in bank 2 (DIMM 2B and 2A). Bank 2 must be populated in pairs. Note: Refer to the "Mainboard layout" on page 14 for the location of the DIMM slots.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
3 System upgrade
64
Upgrading the system memory
This section includes instructions for removing and installing a memory
module.
Altos G530 has four DDR2-400 DIMM slots. Each slot supports 512 MB,
1GB or 2GB memory modules. The maximum memory capacity is 8GB.
Memory module installation guidelines
•
The minimum memory configuration is one DIMM, installed in the
DIMM 1B socket (the socket farthest from the CPU sockets).
However, for optimum performance and dual-channel interleave
operation, a minimum of two DIMMs should be installed. DIMMs
on channel A (DIMM 1A and 2A) are paired with DIMMs on
channel B (DIMM 1B and 2B) to enable 2-way interleaving.
Note:
Dual-channel memory requires symmetrical memory
modules using the same density (e.g. 512 MB), bus width (e.g. x8,
x16) and granule technology (e.g. 512M-bit).
•
Populate both DIMMs in bank 1 (DIMM 1B and 1A) first, before
populating DIMMs in bank 2 (DIMM 2B and 2A). Bank 2 must be
populated in pairs.
Note:
Refer to the “Mainboard layout” on page 14 for the
location of the DIMM slots.