Acer Altos G530 Altos G530 User's Guide - Page 69
Upgrading the processor, Installing the CPU - xeon
View all Acer Altos G530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
59 Upgrading the processor This section includes instructions for installing and removing a processor and heat sink fan (HSF) assembly. Installing the CPU The mainboard has two 604-pin processor socket that support Intel Xeon processors. The system ships out with only a single Intel Xeon processor installed leaving one CPU socket empty. You have the option to purchase an extra CPU for the system. Important: When installing an additional CPU, make sure the CPU has the same stepping and running values at the same frequency specifications as the default CPU. 1 Observe the ESD precautions and pre-installation instructions described on page 35. 2 Locate an empty CPU socket on the mainboard. 3 Pull the CPU socket retainer lever to a fully open, upright position. 4 Remove the CPU from its protective packaging. 5 Align the CPU with the socket, making sure that pin 1 (indicated by the notched corner) of the CPU connects to hole 1 of the socket (on the bottom right corner), then insert the CPU into the socket (1).