Acer Altos G530 Altos G530 User's Guide - Page 185
Configuring the SCSI/SCSI RAID HBA, Using the SCSI HBA setup utility
View all Acer Altos G530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
175 Configuring the SCSI/SCSI RAID HBA This section shows how to create a RAID 1 (mirror) volume. This feature requires the installation or presence of a LSI Logic 1020A SCSI controller. Using the SCSI HBA setup utility During bootup, press Ctrl+C to enter the LSI Logic Configuration screen. Loading the HBA default settings 1 In the LSI Logic MPT SCSI setup screen, press F2. 2 Select Global Properties, then select Restore Defaults. 3 Press Esc, then select Save changes then exit this menu. 4 Select 53C1020/53C1030, then press Enter. 5 Select Restore Defaults, then press Enter. 6 Press Esc, then select Save changes then exit this menu. Using the SCSI RAID HBA setup utility Creating a RAID 1 volume with a hot spare disk 1 In the LSI Logic MPT SCSI setup screen, select 53C1020/53C1030, then press Enter. 2 Select RAID Properties, then press Enter. 3 In the Array Disk field, press the spacebar. If you change the settings in the Array Disk field, the following messages appear: F3 - Keep Data (Create 2 disk arrays) Delete - Erase Disk (Create 2 to 6 disk arrays) 4 Press the Delete key to erase all data on the screen. 5 In the Hot Spare field, press the spacebar.