Acer Altos G530 Altos G530 User's Guide - Page 52
Locate and attach the following cables clamped on the side
View all Acer Altos G530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
42 3 System upgrade (1) Slide the cage into the chassis with the backplane board facing the rear of the chassis. The cage is locked to the chassis with an audible click. (2) Locate and attach the following cables clamped on the side of the chassis to their corresponding connectors on the backplane board: Important: If a four-bay hot-plug SCSI HDD cage is already installed in the top HDD bay, you must block the W83792D_ID1 jumper. Set pins 2 and 3 to short. (1) SCSI data cable
3 System upgrade
42
(1)
Slide the cage into the chassis with the backplane board
facing the rear of the chassis. The cage is locked to the chassis
with an audible click.
(2)
Locate and attach the following cables clamped on the side of
the chassis to their corresponding connectors on the
backplane board:
Important:
If a four-bay hot-plug SCSI HDD cage is already
installed in the top HDD bay, you must block the W83792D_ID1
jumper. Set pins 2 and 3 to short.
(1)
SCSI data cable