Asus P5S-B P5S-B User Manual - Page 38

PWR UP On Modem Act

Get Asus P5S-B PDF manuals and user guides View all Asus P5S-B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

01 III. HARDWARE SETUP 20. Wake-On-LAN Activity Connector (3-pin WOLCON) The WOLCON connector allows the system to power up when there is a wakeup packet or signal is received from the network through the ASUS PCI-L101 LAN card (see ASUS LAN CARD). IMPORTANT! This feature requires that the WAKE On LAN Power Up Control is set to Enabled (see Power Management Setup under BIOS SETUP) and that your system has an ATX power supply with at least 720mA +5V standby power. Ground +5 VSB PME P5S-B Wake-On-LAN Connector 21. Wake-On-Ring Connector (2-pin WOR) The WOR connector connects to internal modem cards with Wake-On-Ring output. The connector powers up the system when a ringup packet or signal is received through the internal modem card. NOTE: For external modems, WakeOn-Ring is detected through the COM port. IMPORTANT! This feature requires that the PWR UP On Modem Act Power Up Control is set to Enabled (see Power Management Setup under BIOS SETUP) and that your system has an ATX power supply with at elast 720mA +5V standby power. III. H/W SETUP Connectors 01 WOR Pin2 Ring# Pin1 Ground P5S-B Wake-On-Ring Connector 38 ASUS P5S-B User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
III. HARDWARE SETUP
ASUS P5S-B User’s Manual
38
20.
Wake-On-LAN Activity Connector (3-pin WOLCON)
The WOLCON connector allows the system to power up when there is a wakeup
packet or signal is received from the network through the ASUS PCI-L101 LAN
card (see
ASUS LAN CARD
).
IMPORTANT!
This feature requires that the
WAKE On LAN
Power Up Control
is
set to
Enabled
(see Power Management Setup under
BIOS SETUP
) and that your
system has an ATX power supply with at least 720mA +5V standby power.
P5S-B Wake-On-LAN Connector
+5 VSB
PME
Ground
0
1
21.
Wake-On-Ring Connector (2-pin WOR)
The WOR connector connects to internal modem cards with Wake-On-Ring out-
put. The connector powers up the system when a ringup packet or signal is re-
ceived through the internal modem card.
NOTE:
For external modems, Wake-
On-Ring is detected through the COM port.
IMPORTANT!
This feature requires that the
PWR UP On Modem Act
Power
Up Control
is set to
Enabled
(see
Power Management Setup
under
BIOS SETUP
)
and that your system has an ATX power supply with at elast 720mA +5V standby
power.
P5S-B Wake-On-Ring Connector
0
1
WOR
Pin2 Ring#
Pin1 Ground
Connectors
III. H/W SETUP