Asus Z87-PLUS Z87-PLUS User's Manual - Page 50
Internal connectors, Z87 Serial ATA 6.0 Gb/s connectors 7-pin SATA6G_1-6 [yellow] - motherboard manual
View all Asus Z87-PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
1.2.9 Internal connectors 1. Intel® Z87 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1-6 [yellow]) These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® Z87 chipset. Chapter 1 • These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode]. Refer to section 3.6.3 SATA Configuration for details. • Before creating a RAID set, refer to section 5.1 RAID configurations or the manual bundled in the motherboard support DVD. 1-34 Chapter 1: Product introduction