Belkin F6D42304 User Manual

Belkin F6D42304 Manual

Get Belkin F6D42304 PDF manuals and user guides View all Belkin F6D42304 manuals
Add to My Manuals
Save this manual to your list of manuals

Belkin F6D42304 manual content summary:

  • Belkin F6D42304 | User Manual - Page 1
    Enhanced Wireless Router User Manual 8820-00034 F6D4230-4
  • Belkin F6D42304 | User Manual - Page 2
    MAC Address Control 49 Configuring the Firewall 51 Using Dynamic DNS 55 Utilities 56 Restarting the Router 57 Updating the Firmware 63 7 Manually Configuring Network Settings 70 8 Recommended Web Browser Settings 75 9 Troubleshooting 77 10 Information 92 Enhanced Wireless Router i
  • Belkin F6D42304 | User Manual - Page 3
    User Manual completely, and pay special attention to the section entitled "Placement of your Enhanced Wireless Router" on the next page. By following our simple setup instructions you will be able to use your Belkin your wireless range • Easy installation - Belkin's Setup Assistant makes setup
  • Belkin F6D42304 | User Manual - Page 4
    and 10 feet from the Router in order to see if distance is the problem. If difficulties persist even at close range, please contact Belkin Technical Support. Note: While some of the items listed below can affect network performance, they will not prohibit your wireless network from functioning; if
  • Belkin F6D42304 | User Manual - Page 5
    interfering. • If your phone supports channel selection, change the channel on the phone to the farthest channel from your wireless network. For example, change the phone to channel 1 and move your Router to channel 11. See your phone's user manual for detailed instructions. • If necessary, consider
  • Belkin F6D42304 | User Manual - Page 6
    information regarding our networking products, visit our website at www.belkin.com/networking or call Belkin Technical Support at: US: 877-736-5771 UK: 0845 607 77 87 Australia: 1800 235 546 New Zealand: 0800 235 546 Singapore: 65 64857620 Europe: www.belkin.com/support Enhanced Wireless Router 4
  • Belkin F6D42304 | User Manual - Page 7
    -Based Advanced User Interface You can set up the Router's advanced functions easily through your web browser, without having to install additional software onto the computer. There are no disks to install or keep track of and, best of all, you can make changes and perform setup functions from any
  • Belkin F6D42304 | User Manual - Page 8
    NOTE: Setup Assistant software is compatible with Windows 2000, XP, and Vista; and Mac OS X v10.x. If you are using another operating system, the Router can be set up using the Alternate Setup Method described in this User Manual (see page 20). Integrated Enhanced Wireless Access Point Enhanced is
  • Belkin F6D42304 | User Manual - Page 9
    sections 1 2 3 4 5 6 7 8 9 10 Package Contents • Belkin Enhanced Wireless Router • Quick Installation Guide • Belkin Setup Assistant Software CD • RJ45 Ethernet Networking Cable • Power Supply • User Manual on the Setup Assistant CD System Requirements • Broadband Internet connection such
  • Belkin F6D42304 | User Manual - Page 10
    Router boots up. During this time, the "router" icon blinks. When the Router has completely booted up, the "router" icon becomes a solid light, indicating the Router is ready for use. Off Blinking Green Solid Green Router is off Router is booting up Router is on and ready Enhanced Wireless Router
  • Belkin F6D42304 | User Manual - Page 11
    , this icon becomes extremely useful in monitoring the status of (J) your Router's connection. Off Router is NOT connected to the (I) Internet (K) Blinking Amber Router is attempting to connect to the Internet Solid Green Router is connected to the Internet Enhanced Wireless Router 9
  • Belkin F6D42304 | User Manual - Page 12
    10 seconds, then release it. The lights on the Router will momentarily flash. The "router" light will begin to blink. When the "router" light becomes solid again, the restore is complete. K. Power Jack - Black Connect the included 12V/1A DC power supply to this jack. Enhanced Wireless Router 10
  • Belkin F6D42304 | User Manual - Page 13
    Belkin Enhanced Wireless Router • RJ45 Ethernet Networking Cable • Power Supply • Belkin Setup Assistant Software CD • User Manual on the Setup Assistant CD USB connection at this time, you will be instructed to use the RJ45 Ethernet port during the installation procedure. If your modem has only a
  • Belkin F6D42304 | User Manual - Page 14
    sections 1 2 3 4 5 6 7 8 9 10 Step 1: Hardware Connections - Follow the Quick Installation Guide (QIG) A WAN B A LAN C D C D D A. Unplug your modem's power cord. Put the Router next to the modem. Raise the Router's antenna. B. Locate the networking cable that connects your
  • Belkin F6D42304 | User Manual - Page 15
    from the computer that is directly connected to the Router. Note for Windows Users: If the Setup Assistant does not start up automatically, select your CD-ROM drive from "My Computer" and double-click on the file named "SetupAssistant" to start the Setup Assistant. Enhanced Wireless Router 13
  • Belkin F6D42304 | User Manual - Page 16
    Screen Verify that you have completed all QIG steps by checking the box to the right of the arrow. Click "Next" to continue. Progress Screen Setup Assistant will show you a progress screen each time a step in the setup has been completed. Enhanced Wireless Router 14
  • Belkin F6D42304 | User Manual - Page 17
    Checking Settings The Setup Assistant will now examine your computer's network settings and gather information needed to complete the Router's connection to the Internet. 1.2 Verifying Hardware Connections The Setup Assistant will now verify your hardware connection. Enhanced Wireless Router 15
  • Belkin F6D42304 | User Manual - Page 18
    Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 1.3 Naming your Wireless Network The Setup Assistant will display the default wireless network name or Service Set Identifier (SSID). This is the name of your wireless or ISP from the drop-down boxes. Enhanced Wireless Router 16
  • Belkin F6D42304 | User Manual - Page 19
    instructions. Note: Do not disconnect any cable or power off the Router while the Router is rebooting. Doing so will render your Router inoperable. 1.6 Checking Internet Connection We are almost done. The Setup Assistant will now check your connection to the Internet. Enhanced Wireless Router
  • Belkin F6D42304 | User Manual - Page 20
    to your Router later, select "Exit the Assistant" and then click "Next". Troubleshooting If the Setup Assistant is not able to connect to the Internet, you will see the following screen. Follow the on-screen instructions to go through the troubleshooting steps. Enhanced Wireless Router 18
  • Belkin F6D42304 | User Manual - Page 21
    network. Follow the on-screen instructions. Congratulations Once you have verified that your other wired and wireless computers are properly connected, your network is set up and working. You can now surf the Internet. Click "Next" to take you back to the main menu. Enhanced Wireless Router 19
  • Belkin F6D42304 | User Manual - Page 22
    Quick Installation Guide See the QIG or Step 1: Hardware Connections from the previous section. Step 2: Set your Computer's Network Settings to Work with a DHCP Server See the section in this User Manual called "Manually Configuring Network Settings" for directions. Step 3 Configure the Router Using
  • Belkin F6D42304 | User Manual - Page 23
    . The default login time-out is 10 minutes. This can be changed from one to 99 minutes. For more information, see the section in this manual titled "Changing the Login Time-Out Setting". Enhanced Wireless Router 21
  • Belkin F6D42304 | User Manual - Page 24
    page is the first page you will see when you access the Advanced User Interface (UI). The home page shows you a quick view of the Router's status and settings. All advanced setup pages can be reached from this page. (2) (5) (11) (4) (3) (6) (7) (8) (1) Enhanced Wireless Router (9) (10) 22
  • Belkin F6D42304 | User Manual - Page 25
    the indicator says "Connected" in blue, the Router is connected to the Internet. When the Router is not connected to the Internet, the indicator will read "Not Connected" in RED. The indicator is automatically updated when you make changes to the settings of the Router. Enhanced Wireless Router 23
  • Belkin F6D42304 | User Manual - Page 26
    quick-navigation links on the left side of the screen. 11. Page Name The page you are on can be identified by this name. This User Manual will sometimes refer to pages by name. For instance "LAN > LAN Settings" refers to the "LAN Settings" page. Enhanced Wireless Router 24
  • Belkin F6D42304 | User Manual - Page 27
    Alternate Setup Method Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Step 4: Configuring your Router for Connection to your Internet Service Provider (ISP) The "Internet/WAN" tab is where you will set up your Router to connect to your Internet Service Provider (ISP). The Router is
  • Belkin F6D42304 | User Manual - Page 28
    Alternate Setup Method Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Setting your Internet Service Provider ( MAC address to connect to the service, you can enter a specific MAC address or clone the current computer's MAC address through this link. (2) Enhanced Wireless Router 26
  • Belkin F6D42304 | User Manual - Page 29
    Alternate Setup Method Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Setting your Internet Service Provider (ISP) Connection Type to Static IP A static IP (2) 3. ISP Gateway Address (3) (3) Provided by your ISP. Enter the ISP gateway address here. (4) Enhanced Wireless Router 27
  • Belkin F6D42304 | User Manual - Page 30
    is required to connect to the Internet. (1) - Your ISP gave you software such as WinPOET or Enternet300 that (2) you use to connect to the Internet. (3) - You have to double-click on a desktop icon other than your (4) browser to get on the Internet. (5) (6) Enhanced Wireless Router 28
  • Belkin F6D42304 | User Manual - Page 31
    For instance, placing a check mark next to this option and entering "5" into the minute field will cause the Router to disconnect from the Internet after five minutes of no Internet activity. This option should be used if you pay for your Internet service by the minute. Enhanced Wireless Router 29
  • Belkin F6D42304 | User Manual - Page 32
    Alternate Setup Method Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Setting your Internet Service Provider (ISP) Connection Type to Point-to-Point Status indicator will read "Connected" if your Router is set up properly. (1) (2) (3) (4) (5) (6) (7) Enhanced Wireless Router 30
  • Belkin F6D42304 | User Manual - Page 33
    gateway/service IP address here. 5. IP Assigned by ISP If your ISP provided you with a specific IP address, select "Yes" and enter your IP address and subnet mask in the fields that appear. 6. Connection ID (Optional) Provided by your ISP. Enter the connection ID here. Enhanced Wireless Router 31
  • Belkin F6D42304 | User Manual - Page 34
    IP Address Provided by your ISP. Enter your L2TP gateway/service IP address here. 5. IP Assigned by ISP If your ISP provided you with a specific IP address, select "Yes" and enter your IP address and subnet mask in the fields that appear. (6) (1) (2) (3) (4) (5) (7) Enhanced Wireless Router 32
  • Belkin F6D42304 | User Manual - Page 35
    / OptusNet Cable User [Australia Only] Follow the on-screen steps and click "Apply Changes" to complete your setup. Setting Custom Domain belkin.com" into IP addresses. Many Internet Service Providers (ISPs) do not require you to enter this information into the Router Enhanced Wireless Router 33
  • Belkin F6D42304 | User Manual - Page 36
    of your computer's adapter and only let that particular computer connect to the Internet service. When you install the Router, its own MAC address will be "seen" by the ISP and may cause the connection not to work. Belkin has provided the ability to clone (copy) the MAC address of the computer into
  • Belkin F6D42304 | User Manual - Page 37
    User Interface. In your browser, type "192.168.2.1" (do not type in anything else such as "http://" or "www") then press the "Enter" key. You will see the Router's home page in your browser window. Viewing the LAN Settings Clicking on the header of the "LAN Setup (3) Enhanced Wireless Router 35
  • Belkin F6D42304 | User Manual - Page 38
    User Interface Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Changing LAN Settings All settings for the internal LAN setup of the Router can be viewed and changed here. 1. IP Address The "IP address" is the internal IP address of the Router feature of your Belkin Router. It is
  • Belkin F6D42304 | User Manual - Page 39
    Domain Name The default setting is "Belkin". You can set a local domain name (network name) for your network. There is no need to change this setting unless you have a specific advanced need to do so. You can name the network anything you want such as "MY NETWORK". Enhanced Wireless Router 37
  • Belkin F6D42304 | User Manual - Page 40
    Using the Web-Based Advanced User Interface Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Viewing the DHCP Client List Page You can view a " (4) button will update the list. If there have been any changes, the list will be updated. (2) (3) (4) (1) Enhanced Wireless Router 38
  • Belkin F6D42304 | User Manual - Page 41
    adapter for information on making this change. (2) Note: Please periodically check for new Router firmware updates from the "Utilities > Firmware update" page. Newer firmware can fix problems, add wireless features, and/or improve wireless performance (see page 63). Enhanced Wireless Router 39
  • Belkin F6D42304 | User Manual - Page 42
    point, so no wireless devices can join the network. Turning off the wireless function of your Router is a great way to secure your network when you are away from home for a long period of time, or don't want to use the wireless feature of the Router at a certain time. Enhanced Wireless Router 40
  • Belkin F6D42304 | User Manual - Page 43
    of Belkin Enhanced Wireless wireless problems. 2) 20MHz/40MHz Auto Setting the Router Router automatically reverts to 20MHz operation to maximize compatibility. We recommend using this as the default mode. 802.11e/WMM QoS Switch Allows you to turn ON or OFF wireless QoS. Enhanced Wireless Router
  • Belkin F6D42304 | User Manual - Page 44
    Enhanced Wireless Router is equipped with the latest security standard called Wi-Fi Protected Access™ 2 (WPA2™) and the legacy security standard called Wired Equivalent Privacy (WEP). Your Router also supports the Wi-Fi Protected Setup™ (WPS) specification, which simplifies the setup of a wireless
  • Belkin F6D42304 | User Manual - Page 45
    back of the Router for three seconds, and then initiate the PBC on the client device. Alternatively, push the "Start PBC" soft button to start this process. 5. Manual Configuration Method: This section lists the default security settings to be set up if not using WPS. Enhanced Wireless Router 43
  • Belkin F6D42304 | User Manual - Page 46
    need to ensure that all your wireless client cards/adapters support WPA2, and that you have downloaded and installed the latest driver. Most of the Belkin wireless cards have driver updates available for download from the Belkin support site: www.belkin.com/networking. Enhanced Wireless Router 44
  • Belkin F6D42304 | User Manual - Page 47
    "WPA-PSK", "WPA2-PSK", or "WPAPSK + WPA2-PSK" (2). This setting will have to be identical on the wireless clients that you set up. "WPA-PSK + WPA2-PSK" mode will allow the Router to support clients running either WPA or WPA2 security. 3. Enter your pre-shared key (PSK) (3). This can be from eight
  • Belkin F6D42304 | User Manual - Page 48
    users: The "Passphrase" option will not operate with Apple® AirPort®. To configure encryption for your Mac computer, set the encryption using the manual enter you WEP key manually by typing in the hex WEP key manually, or you can type Router is now set. Each of your computers on your wireless network
  • Belkin F6D42304 | User Manual - Page 49
    C3 D4 E7 = 128-bit key Note to Mac users: Original Apple AirPort products support 64-bit encryption only. Apple AirPort 2 products can support 64-bit or 128-bit encryption. Please check your to program the encryption settings on your Router and your wireless computers. Enhanced Wireless Router 47
  • Belkin F6D42304 | User Manual - Page 50
    network. The Router is now acting as an access point. To access the Router advanced user interface again, type the IP address you specified into your browser's navigation bar. You can set the encryption settings, MAC address filtering, SSID, and channel normally. Enhanced Wireless Router 48
  • Belkin F6D42304 | User Manual - Page 51
    type in the MAC address of the wireless computer you want to be able to access (3) the wireless network, then click "
  • Belkin F6D42304 | User Manual - Page 52
    MAC address of the wireless computer you want to deny access to the wireless network, then click "
  • Belkin F6D42304 | User Manual - Page 53
    can turn the firewall function off if needed; however, it is recommended that you leave the firewall enabled. Disabling the firewall protection will not leave your network completely vulnerable to hacker attacks, but it is recommended that you leave the firewall enabled. Enhanced Wireless Router
  • Belkin F6D42304 | User Manual - Page 54
    User Interface Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Configuring Internal Forwarding Settings The Virtual Servers function will allow you to route external (Internet) calls for services Manually Entering Settings into the Virtual Server To manually Enhanced Wireless Router 52
  • Belkin F6D42304 | User Manual - Page 55
    User Interface Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Setting Client IP Filters The Router can be configured to restrict access to the Internet, email, or other network services System Settings> Time Zone". (5) (6) (1) (2) (3) (4) (7) (8) (9) Enhanced Wireless Router 53
  • Belkin F6D42304 | User Manual - Page 56
    DMZ host to direct to, enter the last two digits of the IP address of the DMZ host computer, select "Enable" and click "Apply Changes". Enhanced Wireless Router 54
  • Belkin F6D42304 | User Manual - Page 57
    DynDNS as the "DDNS Service" (1). 2. Enter your DynDNS.org user name in the "User Name" field (2). (1) Router will (5) automatically update DynDNS.org's servers with your new IP address. You can also do this manually by clicking the "Update Dynamic DNS" button (5). Enhanced Wireless Router
  • Belkin F6D42304 | User Manual - Page 58
    Using the Web-Based Advanced User Interface Table of Contents sections 1 2 3 4 Router and perform certain administrative functions. (1) To turn off the ping response, select "Block ICMP Ping" (1) and click "Apply Changes". The Router will not respond to an ICMP ping. Enhanced Wireless Router
  • Belkin F6D42304 | User Manual - Page 59
    4. A 60-second countdown will appear on the screen. When the countdown reaches zero, the Router will be restarted. The Router home page should appear automatically. If not, type in the Router's address (default = 192.168.2.1) into the navigation bar of your browser. Enhanced Wireless Router 57
  • Belkin F6D42304 | User Manual - Page 60
    countdown will appear on the screen. When the countdown reaches zero, the Router's defaults will be restored. The Router home page should appear automatically. If it does not, type in the Router's address (default = 192.168.2.1) into the navigation bar of your browser. Enhanced Wireless Router 58
  • Belkin F6D42304 | User Manual - Page 61
    Using the Web-Based Advanced User Interface Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Saving a you back up your current configuration before performing a firmware update. 1. Click "Save". A window called "File Download" will open. Click "Save". Enhanced Wireless Router 59
  • Belkin F6D42304 | User Manual - Page 62
    default name "user.conf". Be sure to name the file so you can locate it yourself later. When you have selected the location and name of the file, click "Save". 3. When the save is complete, you will see the window below. Click "Close". The configuration is now saved. Enhanced Wireless Router 60
  • Belkin F6D42304 | User Manual - Page 63
    Using the Web-Based Advanced User Interface Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Restoring a Previous Configuration This option will allow you to restore a a ".conf". Locate the configuration file you want to restore and double-click on it. Enhanced Wireless Router 61
  • Belkin F6D42304 | User Manual - Page 64
    Using the Web-Based Advanced User Interface Table of Contents sections 1 2 Router's configuration will be restored. The Router's home page should appear automatically. If not, type in the Router's address (default = 192.168.2.1) into the navigation bar of your browser. Enhanced Wireless Router
  • Belkin F6D42304 | User Manual - Page 65
    release new versions of the Router's firmware. Firmware updates contain feature improvements and fixes to problems that may have existed. When Belkin releases new firmware, you can download the firmware from the Belkin update website and update your Router's firmware to the latest version. Checking
  • Belkin F6D42304 | User Manual - Page 66
    locate it yourself later. When you have selected the location, click "Save". 3. When the save is complete, you will see the following window. Click "Close". Enhanced Wireless Router The download of the firmware is complete. To update the firmware, follow the next steps in "Updating the
  • Belkin F6D42304 | User Manual - Page 67
    Updating the Router's Firmware 1. In the "Firmware Update" page, click "Browse". A window will open that allows you to select the location of the firmware update file. 2. Browse to the firmware file you downloaded. Select the file by double-clicking on the file name. Enhanced Wireless Router 65
  • Belkin F6D42304 | User Manual - Page 68
    , the Router firmware update will be complete. The Router home page should appear automatically. If not, type in the Router's address (default = 192.168.2.1) into the navigation bar of your browser. 4. You will be asked if you are sure you want to continue. Click "OK". Enhanced Wireless Router 66
  • Belkin F6D42304 | User Manual - Page 69
    will expire. You will have to log into the Router again to make any more changes. The login time-out option is for security purposes and the default is set to 10 minutes. Note: Only one computer can be logged into the Router's advanced setup interface at one time. Enhanced Wireless Router 67
  • Belkin F6D42304 | User Manual - Page 70
    password. Leaving the password empty will potentially open your Router to intrusion. Advanced Feature: The "Remote Access Port" option allows you to configure the desired "Remote Access Port for Remote Management" feature. The default access port is set to port 80. Enhanced Wireless Router 68
  • Belkin F6D42304 | User Manual - Page 71
    of firmware and alert you that the new firmware is available. When you log into the Router's advanced interface, the Router will perform a check to see if new firmware is available. If so, you will be notified. You can choose to download the new version or ignore it. Enhanced Wireless Router 69
  • Belkin F6D42304 | User Manual - Page 72
    . You will need to enter this information into the Router. 5. Close the window. If you made any changes, the following window will appear. Click "Save". Restart the computer. When the computer restarts, your network settings are now configured for use with the Router. Enhanced Wireless Router 70
  • Belkin F6D42304 | User Manual - Page 73
    (2) (4) 2. Select "Network" from the "System Preferences" menu. (3) Enhanced Wireless Router 3. Select "Built-in Ethernet" (1) next to "Show" in the "Network" menu. 4. Select the "TCP/IP" tab (2). Next to "Configure:" (3), you should see "Manually" or "Using DHCP". If you do not, check the PPPoE
  • Belkin F6D42304 | User Manual - Page 74
    5 6 7 8 9 10 5. If "Manually" is selected, your Router will need to be set up for a Router. (3) 6. If not already selected, select "Using DHCP" next to "Configure:" (3), then click "Apply Now". Your network adapter(s) are now configured for use with the Router. Enhanced Wireless Router
  • Belkin F6D42304 | User Manual - Page 75
    7 8 9 10 Manually Configuring Network Settings in Router. 6. If not already selected, select "Obtain an IP address automatically" (1) and "Obtain DNS server address automatically" (3). Click "OK". Your network adapter(s) are now configured for use with the Router. Enhanced Wireless Router
  • Belkin F6D42304 | User Manual - Page 76
    Manually Configuring Network Settings in Windows 98SE or Me 1. Right-click on "My Network Neighborhood" and select "Properties" from the drop-down menu. 2. Select "TCP/IP -> settings" for your installed (s) are now configured for use with the Router. (1) (3) (2) Enhanced Wireless Router 74
  • Belkin F6D42304 | User Manual - Page 77
    any changes to your web browser's settings. If you are having trouble accessing the Internet or the Web-Based Advanced User Interface, then change your browser's settings to the recommended settings in a connection". If you cannot make a selection, go to the next step. Enhanced Wireless Router 75
  • Belkin F6D42304 | User Manual - Page 78
    . Click on "Edit" then "Preferences". 2. In the "Preferences" window, click on "Advanced" then select "Proxies". In the "Proxies" window, select "Direct connection to the Internet". Enhanced Wireless Router 76
  • Belkin F6D42304 | User Manual - Page 79
    does not appear within 15-20 seconds, open up your CD-ROM drive by double-clicking on the "My Computer" icon that is located on your desktop. 2. Next, double-click on the CD-ROM drive that the Setup Assistant Software CD has been placed in to start the installation. Enhanced Wireless Router 77
  • Belkin F6D42304 | User Manual - Page 80
    appears showing the files on the CD, double-click on the icon labeled "SetupAssistant". 4. If the Setup Assistant still does not start, reference the section titled "Manually Configuring Network Settings" (page 70) of this User Manual for an alternative setup method. Enhanced Wireless Router 78
  • Belkin F6D42304 | User Manual - Page 81
    " on the back of the Router. 4. Try shutting down and restarting your computer, then rerunning the Setup Assistant. If the Setup Assistant is still unable to find the Router, reference the section titled "Manually Configuring Network Settings" for installation steps. Enhanced Wireless Router 79
  • Belkin F6D42304 | User Manual - Page 82
    Configuring Network Settings" (page 70 of this User Manual for an alternative setup method). Problem: • The Setup Assistant completed installation, but my web browser doesn't work. • I am unable to connect to the Internet. The "modem" LED on my Router is off, and the "internet" LED is blinking
  • Belkin F6D42304 | User Manual - Page 83
    to the instructions provided by the publisher of your firewall software for instructions on configuring the firewall to allow Internet access. If you are still unable to access the Internet after disabling any firewall software, please contact Belkin Technical Support. Enhanced Wireless Router 81
  • Belkin F6D42304 | User Manual - Page 84
    the troubleshooting solution titled "I can't connect to the Internet wirelessly, but my network name is listed". No, my network name is not listed-go to the troubleshooting solution titled "I can't connect to the Internet wirelessly, and my network name is not listed". Enhanced Wireless Router 82
  • Belkin F6D42304 | User Manual - Page 85
    may have a range or interference problem. Please see the suggestions discussed in the section titled "Placement of your Enhanced Wireless Router" of this User Manual. 2. Using a computer that is connected to the Router via a network cable (as opposed to wirelessly), ensure that "Broadcast SSID" is
  • Belkin F6D42304 | User Manual - Page 86
    Troubleshooting Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Problem: • My wireless network performance is inconsistent. • Data transfer is sometimes slow. • Signal strength browsing the Internet. For more assistance, see your wireless card's user manual. Enhanced Wireless Router 84
  • Belkin F6D42304 | User Manual - Page 87
    you are configuring the Wireless Router or Access Point from a computer with a wireless client, you will need to ensure that security is turned on for this wireless client. If this is not done, you will lose your wireless connection. Note to Mac users: Original Apple AirPort products support 64-bit
  • Belkin F6D42304 | User Manual - Page 88
    to your Router. For example: C3 03 0F AF 4B B2 C3 D4 4B C3 D4 E7 E4 = 128-bit key 8. Click "OK", and then "Apply" to save the settings. If you are not using a Belkin wireless client card, please consult the manufacturer's user manual for that wireless client card. Enhanced Wireless Router 86
  • Belkin F6D42304 | User Manual - Page 89
    time. Microsoft's patch only supports devices with WPA-enabled drivers such as Belkin 802.11g products. Download the latest driver at http://www.belkin.com/support Problem: I am having difficulty setting up Wireless Protected Access (WPA) security on my Belkin Router for a home network. Solution
  • Belkin F6D42304 | User Manual - Page 90
    Troubleshooting Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Problem: I am having difficulty setting up Wireless Protected Access (WPA) security on a Belkin wireless client card for a home network. Solution: Clients must use the same key that the G Wireless Router or access point
  • Belkin F6D42304 | User Manual - Page 91
    at this time. You also need to ensure that the wireless card's manufacturer supports WPA and that you have downloaded and installed the latest driver from their support site. Supported Operating Systems: • Windows XP Professional • Windows XP Home Edition 1. Under Windows XP, click "Start
  • Belkin F6D42304 | User Manual - Page 92
    Troubleshooting Table of Contents sections 1 2 3 4 5 6 7 8 9 10 3. Under the "Wireless Networks" tab, click the "Configure" button and you will see the following screen. 4. For a home or small business user you set up. 6. Click "OK" to apply settings. Enhanced Wireless Router 90
  • Belkin F6D42304 | User Manual - Page 93
    and coverage Leading edge- best coverage and throughput *Distance and connection speeds will vary depending on your networking environment. Technical Support You can find technical support information at http://www.belkin.com/ networking or www.belkin.com/support/. Enhanced Wireless Router 91
  • Belkin F6D42304 | User Manual - Page 94
    in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try operating in conjunction with any other antenna or transmitter. Enhanced Wireless Router 92
  • Belkin F6D42304 | User Manual - Page 95
    device that are not expressly approved by Belkin International, Inc., may void the user's authority to operate the equipment. Canada-Industry Canada (IC) The wireless radio of this device complies with RSS139 CE 0682 or CE alert marking and may also carry the CE logo. Enhanced Wireless Router 93
  • Belkin F6D42304 | User Manual - Page 96
    Belkin product. b. Where you purchased the product. c. When you purchased the product. d. Copy of original receipt. 2. Your Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin product and how to proceed with your claim. Enhanced Wireless Router
  • Belkin F6D42304 | User Manual - Page 97
    7 8 9 10 Belkin reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser. If Belkin determines, in its damages, so the above limitations may not apply to you. Enhanced Wireless Router 95
  • Belkin F6D42304 | User Manual - Page 98
    Ltd. 4 Pioneer Avenue Tuggerah Business Park Tuggerah, NSW 2259, Australia +61 (0) 2 4350 4600 +61 (0) 2 4350 4700 fax © 2009 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Apple, AirPort, Mac, and Mac OS, are trademarks
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
Enhanced
Wireless Router
User Manual
8820-00034 F6D4230-4