Bernina 1150MDA Owners Manual - Page 102
Notes, Sergers, Two-Thread Flatlock
View all Bernina 1150MDA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Sergers Mastering Your BERNINA® Two-Thread Flatlock using mtc (for 1300MDC/1150MDA models only) Fabric medium weight cotton, 6" x 8" each Needle 80/12 Universal Thread 1 cone serger thread 1 cone Heavy weight decorative thread Presser Foot standard Stitch wide 2-thread flatlock Notes Divide the fabric into 3 equal sections along the 8" side, finger press creases into place. Thread the serger for a Wide Two-Thread Flatlock stitch. Use Heavy Decorative Thread in the lower looper and coordinating allpurpose serger thread in the needle. Set the tensions according to the manual for a wide 2-thread flatlock stitch. Set the mtc lever to the minimum setting, serge on the first fold. Pull the serged fabric from the left and right sides of the flatlocked band. The stitched band will falttenm looking like a beautiful ribbon. Move the mtc lever to the maximum setting, serge on the second fold. Pull the seam flat as with the first stitch. Compare the extra width provided by adjusting the mtc lever. Mark the sample with mtc settings: mtc - minimum mtc - maximum Trim and mount the sample. MASTERING YOUR BERNINA® SERGERS 6/2006 102 ©2006 BERNINA® of America, Inc. Permission to copy and distribute in printed and electronic formats granted only to Authorized BERNINA® Dealers