Bernina 1150MDA Owners Manual - Page 3

Sergers Class 1 General Information Class Overview Mastering Your BERNINA® Machine Overview Parts of the serger Setting up the serger Serger Accessories Tweezers Lower Looper Threader (700D only) Needle Threader (optional for 700D & 800DL) Brush/Needle Insertion Tool Spool Caps Spool Cones Thread Nets Thread Good quality vs. poor quality Construction/All-Purpose Thread Decorative Thread Needles Types of Needles Sizes of Needles Parts of Needles Matching Needle & Thread Threading for Overlock Serging The Threading Path Threading Order First - Upper Looper (Blue) Second - Lower Looper (Red) Third - Right Needle (Green) Fourth - Left Needle (Yellow) Test Serging Basic Serging Samples 1 Balanced 4-Thread Overlock 2 Adjusting Tensions - Loopers 3 Adjusting Tensions - Loopers 4 Adjusting Tensions - Needles 5 Stitch Length Adjustment 6 Cutting Width Adjustment 7 Differential Feed - Stretch 8 Differential Feed - Pucker 9 Differential Feed - Gathering & Easing 10 Micro Thread Control - mtc 11 Securing Serged Seams 12 Serging a Tubular Project Care & Cleaning Removing Lint from Inside Serger Oiling Replacing the Cutting Knives Yearly "Tune Up" by Authorized BERNINA® technician This class is formatted for owners of the following models of BERNINA® overlock machines: • 700D • 800DL • 1150MDA • 1300MDC MASTERING YOUR BERNINA® SERGERS 6/2006 3 ©2006 BERNINA® of America, Inc. Permission to copy and distribute in printed and electronic formats granted only to Authorized BERNINA® Dealers