Bernina 1150MDA Owners Manual - Page 90

Sergers Mastering Your BERNINA® Cording Foot Wire-Edged Fabric Fabric mediumweight fabric, 3" x 18" Other 28 gauge floral wire, two 24" lengths Needle 80/12 Universal Thread 2 cones serger thread 1 cone YLI Woolly Nylon Presser Foot Cording Stitch 3-thread rolled edge Notes Set the serger for a 3-thread rolled edge (right needle) with Woolly Nylon in the upper looper. Adjust settings as indicated. Pull the Stitch Selection lever towards you. Adjust the stitch length to 1.75mm. Set cutting width at 1.5. Attach the Cording Foot. Following the direction in the instruction leaflet for the Cording Foot, insert the wire through the guides. Place the fabric under the presser foot and serge along one 18" edge, feeding the wire through the foot as you serge. Use wire cutters to cut the wire. Do not use the serger knives. Repeat for the other 18" edge of the fabric. Return stitch length and thread tension levers to normal. Return the rolled hem lever to normal sewing position. Secure the thread tails with a seam sealant. When the sealant is dry, cut the thread tails. Use wire cutters to trim the wire, if needed. Tie the wired fabric into a bow. Trim and mount the sample. MASTERING YOUR BERNINA® SERGERS 6/2006 90 ©2006 BERNINA® of America, Inc. Permission to copy and distribute in printed and electronic formats granted only to Authorized BERNINA® Dealers