Bernina 1150MDA Owners Manual - Page 112

Sergers Mastering Your BERNINA® Multi-Purpose Foot with the Gathering Attachment Fabric mediumweight cotton bias strip, 2" x 8 mediumweight cotton, 3" x 18" Other 12" length of 3/8" cotton filler cord Needle 80/12 Universal Thread 4 cones serger thread Presser Foot Multi-Purpose Foot with Guide Other Gathering Attachment Stitch 4-thread overlock Notes Following the instructions in your owner's manual, thread the serger for a 4-thread overlock stitch using both needles. Adjust settings for a balanced stitch. Set stitch length to 3mm. Adjust differential feed to 2. Attach the Multi-Purpose Foot (no guide), following the directions in the instruction manual for the Multi-Purpose Foot with Guide. Attach the Gathering Attachment following the directions in the instruction leaflet. Note: 700D and 800DL also need the Attachment Base. Wrap the bias strip around the cord and place the wrapped cord in the groove under the foot. Take 2 or 3 stitches into the fabric and lower the needles into the fabric. Place the 3" x 18" fabric under the Gathering Attachment and next to the needles. Serge, covering the cord, gathering the fabric strip and seaming all layers together. Mount the sample on the following page. MASTERING YOUR BERNINA® SERGERS 6/2006 112 ©2006 BERNINA® of America, Inc. Permission to copy and distribute in printed and electronic formats granted only to Authorized BERNINA® Dealers