Bernina 1150MDA Owners Manual - Page 98

Sergers Wide Two-Thread Flatlock Fabric mediumweight cotton, 4" x 6" Needle 80/12 Universal Thread 1 cone serger thread 1 cone YLI Jeans Stitch Presser Foot standard Stitch wide 2-thread flatlock Attach the Upper Looper Converter to the upper looper. Note: This is an optional accessory for the 700D. Following the instructions in your owner's manual, thread the serger for a 2-thread flatlock stitch using Jeans Stitch in the lower looper. Adjust settings as indicated. Adjust the stitch length to 2.5mm. Fold the fabric in half to 2" x 6" and position it halfway between the left needle and the stitch finger. Optional: Attach the Right Seam Guide. Move the Right Seam Guide halfway between the needle and the stitch finger. Slowly serge the fabric. The looper threads will extend beyond the fabric on the right side of fold. Gently pull the fabric flat Return stitch length and thread tension levers to normal. Trim and mount the sample. Mastering Your BERNINA® Notes MASTERING YOUR BERNINA® SERGERS 6/2006 98 ©2006 BERNINA® of America, Inc. Permission to copy and distribute in printed and electronic formats granted only to Authorized BERNINA® Dealers