Bernina 1150MDA Owners Manual - Page 84
Notes, Sergers, Blindstitch Foot, Joining Lace to Lace
View all Bernina 1150MDA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Sergers Blindstitch Foot Joining Lace to Lace Fabric 2 pieces of flat edging lace, 6" each Needle 70/10 Sharp or Microtex Thread 3 cones serger thread Presser Foot Blindstitch Stitch narrow 3-thread overlock Set the serger for a narrow 3-thread overlock stitch (right needle). Adjust settings as indicated. Loosen the right needle tension slightly. Pull the Stitch Selection lever towards you. Adjust the stitch length to 1.5mm. Attach the Blindstitch Foot. Move the fabric guide just to the left of the knife line on the stitch plate. Stiffen the lace with spray starch or fabric stiffener. With right sides together, place the header of the laces under the presser foot against the guide. Serge the laces together. Gently pull the lace flat and press. Trim and mount the sample Mastering Your BERNINA® Notes MASTERING YOUR BERNINA® SERGERS 6/2006 84 ©2006 BERNINA® of America, Inc. Permission to copy and distribute in printed and electronic formats granted only to Authorized BERNINA® Dealers