Bernina 730 Manual - Page 62
Threading, upper, threads
View all Bernina 730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
44 8 9 35 7 4 45 SI ,;0 4 Thread tension regulator 7 Thread take-up lever 8 Thread tension 9 Thread tension regulation disc. 35 Spool pin 44 Thread guide slit 45 Needle holder eyelet. Threading the two upper threads To thread the two upper threads of the machine for pintucking, proceed aS for normal sewing. Place the two reels of thread onto the two pins 35 of the double spool holder at back on top of machine arm. Now pass the thread of the front reel through pretension disc 43, also placed at the back; then into slot running across top arm and draw the thread into left tension disc, down to thread tension regulator 4, and up again through slot of thread take-up lever 7. Then down again to needle holder eyelet 45 and finally from front to rear through eye of left needle. With the second thread proceed in the same manner, but draw it through the right tension disc. From there through thread tension regulator up to thread take-up lever and into the slit of same. Now down again to needle holder eyelet and finally through eye of right needle. Both threads should always run separately through thread tension in order to produce finer pintucks.