Bernina 730 Manual - Page 65
illustration
View all Bernina 730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Fig. 83 / 1 • •/ , 1111,1)111,I )11),/..P11/ P1)"./11O.a I » I 0,12/t. 1.O,Xc),;•, • , 0./2))1)/1)00i /P)),/,,Thi,»,). ' ,P))/ / .• f»0/,.,) , Mg. 84 • • Y r)??,7 For fine fabrics, such as organdie, organza a. s. o., set zigzag lever to stitch width 2 and stitch length adjusting lever to 1. After having brought up the under thread, lay the fabric under the presser foot and begin to sew in the well known manner. The result will be a hemstitch as shown in fig. 83. If suitable ornamental stitches of the automatic system are used instead of the usual zigzag stitch, effective ornamental hemstitches will he produced, such as shown in the following illustrations. With ornamental stitch cam no. 1 (Blindstitch) Sew first seam. After having reached the required length, turn the fabric by 180 degrees and sew the second seam in such a way that the zigzag stitches are opposite each other. Stitch length: 1.5 Stitch width: 3.5 With ornamental stitch cam no. 1 Sew first seam. After having reached the required length, turn the cloth by 180 degrees and sew the second seam in such a way that the needle, when deviated (i.e. every 6th stitch), pierces into the hole already existing from the first needle. In the middle of the illustration, just between the two ornamental stitchings, there will be a normal seam with the ordinary zigzag stitch. Stitch length: 1.5 Stitch width: 3 to 3.5 63