Bose Lifestyle 48 Installation guide - Page 12
Connecting the speakers to the Acoustimass, module - connections
View all Bose Lifestyle 48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
English System Installation Figure 7 Front features of the media center Front door - Make sure you have enough room to lift this door. Display window - Make sure you can see this information while using your system. ® Disc tray - Make sure nothing blocks this The IR Emitter, which enables certain CD/DVD tray as it slides open. remote control operation, is located here. Connecting the speakers to the Acoustimass® module A B CAUTION: Before you make any connections, be sure that the media center, the Acoustimass module, and any additional equipment are not connected to AC power. Your system may have Jewel Cube® speakers (image A on the left), which use a plug-in cable connect, or cube array or single cube speakers (images B and C respectively,) which use a two-wire cable. LIFESTYLE® DVD systems include five speakers. C Connecting the plug-in cable to Jewel Cube® speakers Note: If your system has cube or cube array speakers, follow the instructions in "Making the two-wire connections for cube or cube array speakers" on page 13. The positive and negative wires of the plug-in cable are properly oriented for polarity and the plug is designed to fit only one way into the jack. 1. Match the correct cable to the corresponding speaker location: • Front speaker cables have blue RCA connectors on one end and speaker plugs at the other end with L (left), R (right), or C (center) markings. • Surround speaker cables have orange RCA connectors at one end and speaker plugs at the other end with L (left) or R (right) markings. 12