Bose Lifestyle 48 Installation guide - Page 15
Connecting the Acoustimass, module to the media center - remote
View all Bose Lifestyle 48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
English System Installation Connecting the Acoustimass® module to the media center Connect the Acoustimass module to the media center with the audio input cable (Figure 11). Note: Be sure that each connector is fully inserted into each jack. 1. You may find it easier to insert the power adapter cord into the media center first. Do not plug the other end into an AC (mains) power outlet until all connections are completed. 2. Plug the small black multi-pin connector (flat side up) into the Speakers jack labeled "Main" on the back of the media center. 3. Insert the telephone-style RJ-45 connector on the other end of the audio input cable into the Audio INPUT jack on the Acoustimass module. When properly inserted, it locks in place. Note: An antenna is built into the media center power cord; be sure to unwrap the power cord for the best remote control operation (Figure 11). Note: Refer to "Expanding your system to other rooms" on page 32 for information on connecting a second room. Figure 11 Acoustimass connection to media center Media center connector panel Power adapter cord 1 Acoustimass module connector panel Audio input cable Note: When fully inserted into the jack, the connector locks in place. To release the cable connector, press the tab. CAUTION: Do not place strain on the audio input cable, especially on the connection to the Acoustimass module. Excessive strain on the cable may cause damage to the connection at the Acoustimass module. When disconnecting the cable from the Acoustimass module, be sure to press the tab on the connector. 15