Bose Lifestyle 48 Installation guide - Page 26

English Reference Connecting your cable/satellite box to the system There are various ways to make the cable/satellite connections: 1. Connect cable/satellite L & R Audio OUT to the L & R Audio IN jacks on the media center. • If the cable/satellite box has a DIGITAL Audio OUT jack, connect it to the CBL/SAT DIGITAL Audio IN jack on the media center. 2. If the cable/satellite box has an S-VIDEO OUT jack, connect it to the S-VIDEO IN jack on the media center. Use another S-VIDEO cable to connect the S-VIDEO OUT jack on the media center to an S-VIDEO jack on the TV. • If the cable satellite box has only a composite VIDEO OUT jack, connect that to the composite VIDEO IN jack on the media center. Connect a VCR to this system as follows: 1. If your cable satellite box has an additional set of Audio and VIDEO OUT jacks connect them to the corresponding Audio and VIDEO IN jacks on your VCR. 2. Connect the VCR to the VIDEO IN jack on the media center. If that jack is unavailable, connect the VCR directly to the TV. In Figure 22, select Input 2 on your TV to watch cable/satellite programs. Select the CBL/SAT sound source. This input will also provide better video quality when watching DVDs. To watch videotapes, select Input 1 on your TV (or the TV input to which you directly connected the VCR) and select the VCR sound source. Note: Additional cables may be purchased at an electronics store or authorized Bose® dealer. Figure 22 Set top box and VCR Cable TV, satellite, or antenna cable If the CBL/SAT box has only a composite VIDEO OUT jack, connect that to the composite VIDEO IN jack on the media center.Connect the VCR composite VIDEO OUT directly to the TV. 26