Bose Lifestyle 48 Installation guide - Page 30

English Reference Figure 26 AUX input connections Media center connector panel AUDIO OUT R L CD changer or other playback equipment Using digital audio connections If your TV, VCR, tape deck, or AUX component has digital audio output jacks, you may connect them to the media center. In addition to the digital connection, be sure to connect L and R stereo outputs from the component to the media center. This will provide uninterrupted audio. See Figure 27. • For a digital connection, use a 75Ω cable with RCA connectors (such as a video cable). • For an optical digital connection, insert an optical digital cable into the Optical IN on the media center rear panel. Use the Optical OUT jacks on the media center rear panel if you plan to make a digital recording from that component. Note: Before you can listen to a source through the OPTICAL input, you need to assign the OPTICAL connection to that source: TV, VCR, CBL/SAT or AUX. See your operating guide for instructions on using the system menus. Figure 27 Digital audio and other media center panel connections. Antenna extender Data port IR emitter Serial data Optical audio connections Digital audio connections 30