Brother International 925D Users Manual - Multi - Page 44
Costura de prueba
View all Brother International 925D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Test-sewing • Test-sew after threading. (1) Place a piece of scrap material under the presser foot for test sewing. NOTE: Always lift the presser foot before placing the fabric under it. Just running the fabric under the foot without lifting the presser foot may cause an uneven seam. (2) Holding the needle threads with your left hand, turn the pulley slowly a few times in the counter clockwise direction with your right hand, and check to see that the threads entwine themselves before using the foot pedal to sew. Costura de prueba • Haga una prueba después de enhebrar. (1) Coloque el trozo de tejido debajo del prensatelas. NOTA: Levante siempre el prensatelas antes de colocar el tejido debajo. El mero hecho de colocar el tejido debajo del prensatelas sin levantarlo puede causar una costura desigual. (2) Mientras sujete los hilos de las agujas con la mano izquierda, gire la polea despacio un par de veces en el sentido contrario al de las manecillas del reloj con la mano derecha, y averigue que los hilos se enganchen antes de utilizar el prensatelas para coser. 9 37