Brother International 925D Users Manual - Multi - Page 55
To Do Rolled Edge Stitch, To Do Narrow Overlock Stitch
View all Brother International 925D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
(6) Adjust the stitch length. Set the stitch length adjustment lever to "R" position as shown in the illustration. This adjustment is suitable for either Narrow Overlock stitch or Rolled Edge stitch. (6) Ajuste el largo de las puntadas. Coloque la palanca de ajuste del largo de las puntadas en la posición "R" tal como lo muestra la ilustración. Este ajuste conviene tanto para las puntadas overlock estrechas como para las de dobladillo enrollado. 234 R To Do Rolled Edge Stitch This application rolls the edge of the fabric inside of the hem stitch. The lowerlooper tension should be tightened. This pulls the upperlooper thread causing the edge of the fabric to fold around the remaining stitch finger. After completing steps (1) through (6) above, adjust your machine to these recommended thread tension settings: Upperlooper thread tension at 0-2 Lowerlooper thread tension at 6-8 Right needle thread tension at 4 Tension may vary slightly according to the fabric and thread used. Para realizar puntadas de borde enrollado Esta función permite meter el borde del tejido en las puntadas de dobladillo. Para poder realizarlo, conviene aumentar la tensión del áncora inferior. Así, se tira del hilo del áncora superior y el borde del tejido se dobla alrededor de la uñeta remanente. Después de implementar las operaciones (1) a (6) indicadas arriba, se recomienda ajustar la máquina en los siguientes valores de tensión de hilo: Tensión del hilo del áncora superior entre 0 y 2 Tensión del hilo del áncora inferior entre 6 y 8 Tensión del hilo de la aguja derecha en 4. La tensión puede variar ligeramente según los teji dos e hilos utilizados. To Do Narrow Overlock Stitch This is a decorative application used for finishing the edge of the fabric. After completing steps (1) through (6) above, adjust the thread tension to achieve a normal 3-thread overlock stitch. Recommended thread tension settings are: All thread tensions should be set at 4 Tension may vary slightly according to the fabric and thread used. Para realizar puntadas overlock estrechas Esta función decorativa conviene para mejor terminar el borde del tejido. Después de los puntos (1) a (6) indicados arriba, ajuste las tensiones de los hilos con vistas a lograr una puntada overlock normal de tres hilos. Los ajustes de tensión recomendados son: 12 Todas las tensiones de los hilos deben estar en 4. La tensión puede variar dependiendo de los tejidos e hilos utilizados. 48