Brother International BAS-342G Instruction Manual - English - Page 47
Setting the split number, USING THE OPERATION PANEL ADVANCED OPERATIONS, Continuous split]
View all Brother International BAS-342G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
7. USING THE OPERATION PANEL (ADVANCED OPERATIONS) 7-6. Setting the split number If split data (data that causes sewing to pause) exists within a single program, the numbers that are used to specify the patterns that are separated by split data are called split numbers. Pattern 1 Pattern 2 Pattern 1: Split No. 1 Pattern 2: Split No. 2 Pattern 3: Split No. 3 4964Q Pattern 3 1. Press the or key (1) to select a program number for a program that contains split data. • The program number will flash in the PROGRAM No. display (2). 2. Depress the work clamp switch (3) to lower the work clamp, and then depress the start switch (4). • The work clamp will move to the sewing start position, and then the program number will be applied. • The program number will stop flashing and illuminate steadily. 3. Press the SELECT key (5) so that the SPLIT No. indicator (6) illuminates. • The split number will appear in the menu display (7). 4. Press the or key (8) to set the split number. 4017M The setting for memory switch No. 403 lets you select the split mode. [Continuous split] Memory switch No. 403 = 0 (Split mode is enabled after split data is detected) Memory switch No. 403 = 1 (Split mode is always enabled) • Sewing is carried out each time in the order of steps 1 → 2 → 3 → 1 (for example, if there are two sections of split data). [Independent split] Memory switch No. 403 = 2 • The pattern for the displayed split number is sewn independently. BAS-342G 38