Brother International BAS-342G Instruction Manual - English - Page 59
Writing all sewing data to the CF card at once
View all Brother International BAS-342G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
8. USING CF CARDS 8-3-2. Writing all sewing data to the CF card at once 1 Select the [w 2] data read/write mode. 4578Q 2 Press the R/W key. • [SEd-] will change to [ ALL]. * If you press the or key to select the program numbers that you would like to write and then continue to carry out the following procedure, you can write the selected sewing data in separate lots. 4577Q 3 Press the R/W key. 4 End data read/write mode • The buzzer will sound and the all sewing data will be copied from the internal memory onto the CF card. • The program numbers that have been written will appear in the menu display. Writing * If there is a large volume of data in the internal memory, it will take some time for all of it to be written. To halt the writing of data, press the STOP switch. If you then press the RESET key, the display will change back to [ ALL]. 4977Q Press the TEST key. Turn off the power switch, remove the CF card, and then close the cover of the CF slot. TEST indicator switches off Refer to the service manual for details on other read/write modes. BAS-342G 50