Brother International BAS-342G Instruction Manual - English - Page 77
TABLE OF ERROR CODES, Communication and memory-related errors, R/W key has not been pressed.
View all Brother International BAS-342G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
12. TABLE OF ERROR CODES Communication and memory-related errors Code Cause and remedy Connection communication error with power supply motor P. C. board detected when power was turned on. E401 Turn off the power, and then check that connector P6 on the power supply motor P.C. board and connector P17 on the main P.C. board are properly connected. E402 Communication error with programmer detected when power is turned on. Turn off the power, and then check that connector P7 on the main P.C. board is properly connected. E403 Connection error with PMD P. C. board detected when power was turned on. Turn off the power, and then check that connector P1 on the PMD P.C. board is properly connected. E410 Communication error with main P. C. board detected. Turn off the power, and then turn it back on again. E411 Communication error with power supply motor P. C. board detected. Turn off the power, and then turn it back on again. E412 Communication error with programmer detected. Turn off the power, and then turn it back on again. E413 Communication error with PMD P. C. board detected. Turn off the power, and then turn it back on again. E420 No CF card is inserted. E421 Program contents are incorrect and cannot be used, or no data. Check that the CF card or floppy disk contains data with this program number. E422 Error occurred while reading the CF card or floppy disk. Check the data on the CF card or floppy disk. E424 Insufficient free space on CF card. Use a different CF card. Error occurred while writing to the CF card or floppy disk. E425 Use the specified type of CF card. Check if the floppy disk is write-protected and if it has enough free space. E426 R/W key has not been pressed. Press the R/W key to load the data. CF card or floppy disk does not contain any data with this program number. E427 Check the program number. Data that has already been loaded into internal memory can be used without having to press the R/W key again. E430 Data cannot be backed up to main P.C. board. Turn off the power, and then turn it back on again. E440 Data memory error on main P.C. board. Turn off the power, and then turn it back on again. E450 Model selection cannot be read from the machine head memory. Turn off the power and check that connector P3 on the power supply motor P.C. board is properly connected. E451 Data cannot be backed up to machine head memory. Turn off the power, and then turn it back on again. Machine head memory is not connected. E452 Turn off the power, and then check that connector P3 on the power supply motor P.C. board is properly connected. E474 Internal memory is full and copying is not possible. Clear the sewing data. BAS-342G 68