Brother International BAS-342G Instruction Manual - English - Page 57

Data read/write mode, USING CF CARDS, Turn on the power switch., Switch to data read/write mode.

Get Brother International BAS-342G PDF manuals and user guides View all Brother International BAS-342G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

8-3. Data read/write mode 1 2 Turn on the power switch. 3 Switch to data read/write mode. 8. USING CF CARDS With the power turned off, insert the CF card into the CF slot. NOTE: • Make sure the CF card is facing the correct way. • Always be sure to keep the cover closed except when inserting and removing the CF card. If this is not done, dust may get inside and cause problems with operation. • If no valid data can be found, the CF media indicator will not illuminate. 4453Q While pressing the TEST key, press the R/W key. • The mode number will appear in the PROGRAM No. display, and the setting details for that mode will appear in the menu display. • The initial mode is sewing data reading mode. (Refer to the read/write mode list) TEST indicator and CF media indicator illuminate 4574Q 4 Press the or key to select the mode. 4575Q [Read/write mode list] PROGRAM No. display r 1 w 2 r 3 w 4 r 5 w 6 r 7 w 8 r 9 w 10 r 11 w 12 r 13 Menu display [-SEd] [SEd-] [-MEM] [MEM-] [-UPG] [UPG-] [-SyS] [LoG-] [-Fdd] [Fdd-] [-EoP] [EoP-] [oPFd] Setting items Sewing data is read from the CF card. (*1) Sewing data is written to the CF card. Memory switch settings are read from the CF card. Memory switch settings are written to the CF card. User programs are read from the CF card. User programs are written to the CF card. Control programs are read from the CF card and used to update the firmware version. Error log data is written to the CF card. Sewing data is read from the floppy disk. (*2) (*3) Sewing data is written to the floppy disk. (*2) Expansion option output (*4) data is read from the CF card. Expansion option output data is written to the CF card. Expansion option output data is read from the floppy disk. (*2) *1 The sewing data that can be used with this sewing machine is data that has been created for the BAS-300G series. *2 Only valid when using an optional floppy disk drive. *3 Sewing data for the BAS-300 series, BAS-300A series and BAS-300E/F series can be read. *4 Refer to the instruction manual for the programmer for details of expansion option output. BAS-342G 48

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
8. USING CF CARDS
48
BAS-342G
8-3. Data read/write mode
1
With the power turned off, insert the CF card into the CF
slot.
NOTE:
•
Make sure the CF card is facing the correct way.
•
Always be sure to keep the cover closed except
when inserting and removing the CF card. If this is
not done, dust may get inside and cause problems
with operation.
•
If no valid data can be found, the CF media indicator
will not illuminate.
2
Turn on the power switch.
3
Switch to data read/write mode.
TEST indicator and CF media indicator illuminate
While pressing the TEST key, press the R/W key.
•
The mode number will appear in the PROGRAM No.
display, and the setting details for that mode will
appear in the menu display.
•
The initial mode is sewing data reading mode. (Refer
to the read/write mode list)
4
Press the
or
key to select the mode.
[Read/write mode list]
PROGRAM No.
display
Menu display
Setting items
r 1
[-SEd]
Sewing data is read from the CF card. (*1)
w 2
[SEd-]
Sewing data is written to the CF card.
r 3
[-MEM]
Memory switch settings are read from the CF card.
w 4
[MEM-]
Memory switch settings are written to the CF card.
r 5
[-UPG]
User programs are read from the CF card.
w 6
[UPG-]
User programs are written to the CF card.
r 7
[-SyS]
Control programs are read from the CF card and used to update the firmware version.
w 8
[LoG-]
Error log data is written to the CF card.
r 9
[-Fdd]
Sewing data is read from the floppy disk. (*2) (*3)
w 10
[Fdd-]
Sewing data is written to the floppy disk. (*2)
r 11
[-EoP]
Expansion option output (*4) data is read from the CF card.
w 12
[EoP-]
Expansion option output data is written to the CF card.
r 13
[oPFd]
Expansion option output data is read from the floppy disk. (*2)
*1
The sewing data that can be used with this sewing machine is data that has been created for the BAS-300G series.
*2
Only valid when using an optional floppy disk drive.
*3
Sewing data for the BAS-300 series, BAS-300A series and BAS-300E/F series can be read.
*4
Refer to the instruction manual for the programmer for details of expansion option output.
4453Q
4574Q
4575Q