Brother International BAS-415 Instruction Manual - English - Page 42
Setting, bobbin, thread, counter, breakage
View all Brother International BAS-415 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Setting bobbin thread counter and thread breakage suns • The display is based on counter system which the number is decreased after sewing one pattern is completed or is canceled. After counting is completed, it can show the messages with beep sound when starting next sewing_ The counter number can be set from 0 to 99. Also, ON/OFF of thread breakage detection can be switched. • The bobbin thread counter can be set before data entry, during data input, and after data input. 8. (sewing mode) (during suspension) • THREAD .s • SENSOR , 1. Press the key in sewing mode or during suspension. * When the key is pressed and the upper left indicator lights, thread breakage detection will operate. 2. Move the cursor on the desired row with the < < > key and < j>> key. (The cursor will move.) 3. Enter the set times with the key and key. * The numbers 1 to 9 are selected cyclically. 4. Press the key to select ON/OFF of the bobbin thread counter_ E N. D fi 5. After entering set times, press the key. The machine will enter sewing mode_ 1 i i ' . , %i;t Function ' To change cursor position on ~ zA. , * „ number (The cursor will appear • ST. Count Total stitch number is displayed here until it is cleared. It can be stored even though the power is turned off. Ci 8 Function ,'.i.• 'r .4 '''' /, $ ,0 e and move.) ,, To enter set times (The numbers 1 .1 ,, to 9 are displayed cyclically.) ' , i r.,:.„.. 1 2 ,.g. •• 1 8,6 i , , - . i 4, `: To switch thread breakage sensor (ON and OFF are alternately pgpggg . i displayed.) . To switch ON/OFF of bobbin 3 . thread counter function c~E" To change current counter number to set value 5FE5IIS£ 'S