Brother International DCP 7020 Users Manual - English - Page 19

Load document, Using the automatic document feeder (ADF), Using the automatic, document feeder ADF - ink

Get Brother International DCP 7020 - B/W Laser - All-in-One PDF manuals and user guides
UPC - 012502612834
View all Brother International DCP 7020 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Introduction Load document 3 Unfold the ADF document output support flap. You can make copies and scan from the ADF 1 (automatic document feeder) and from the scanner glass. Using the automatic document feeder (ADF) The ADF can hold up to 35 pages and feeds each sheet individually. Use standard 20 lb (80 g/m2) paper and always fan the pages before putting them in the ADF. Improper Setup ■ DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper-clipped, pasted or taped. ■ DO NOT use cardboard, newspaper or fabric. ■ Make sure documents written with ink are completely dry. ■ Documents to be scanned must be from 5.8 to 8.5 in. (147.3 to 215.9 mm) wide and 5.8 to 14 in. (147.3 to 356 mm) long. 1 Fan the pages well. Make sure you put the documents face up, top edge first in the ADF until you feel them touch the feed roller. 2 Adjust the paper guides to fit the width of your documents. CAUTION DO NOT pull on the document while it is feeding. 1 - 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
Introduction
1 - 6
1
Load document
You can make copies and scan from the ADF
(automatic document feeder) and from the
scanner glass.
Using the automatic
document feeder (ADF)
The ADF can hold up to 35 pages and feeds
each sheet individually. Use standard 20 lb
(80 g/m
2
) paper and always fan the pages
before putting them in the ADF.
■
Make sure documents written with ink are
completely dry.
■
Documents to be scanned must be from
5.8 to 8.5 in. (147.3 to 215.9 mm) wide
and 5.8 to 14 in. (147.3 to 356 mm) long.
1
Fan the pages well. Make sure you put
the documents
face up, top edge first
in the ADF until you feel them touch the
feed roller.
2
Adjust the paper guides to fit the width of
your documents.
3
Unfold the ADF document output
support flap.
Improper Setup
■
DO NOT
use paper that is curled,
wrinkled, folded, ripped, stapled,
paper-clipped, pasted or taped.
■
DO NOT
use cardboard, newspaper or
fabric.
CAUTION
DO NOT
pull on the document while it is
feeding.