Brother International DCP 7020 Users Manual - English - Page 24
To load paper or other media in the manual feed slot, properly, resulting in a skewed printout or
UPC - 012502612834
View all Brother International DCP 7020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Chapter 1 To load paper or other media in the manual feed slot You can load envelopes and special print media one at a time into this slot. Use the manual feed slot to print or copy on labels, envelopes or thicker paper. 1 Slide the paper guides to fit the paper size. 2 Using both hands put one sheet of paper in the manual feed slot until you feel the front edge of the paper touch the paper feed roller. Let go of the paper when you feel the DCP feed the paper in a short distance. Note When you put paper in the manual feed slot, please remember the following: ■ The side to be printed on must be face up. ■ Put the leading edge (top of the paper) in first and push it gently into the slot. ■ Make sure that the paper is straight and in the proper position on the manual feed slot. If it is not, the paper may not be fed properly, resulting in a skewed printout or a paper jam. ■ Do not put more than one sheet or envelope in the manual feed slot at a time, or you may cause the DCP to jam. ■ To easily remove a small printout from the output tray, lift up the scanner cover by using both hands as shown in the illustration. You can still use the DCP while the scanner cover is up. To close the scanner cover, push it down with both hands. 1 - 11