Brother International DCP-8155DN Network User's Guide - English - Page 147
How to create a CSR, Auto Register IPv4
View all Brother International DCP-8155DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Security features j Click Yes, if the fingerprint (thumbprint) is correct. Note The fingerprint (thumbprint) is printed on the Network Configuration Report (See Printing the Network Configuration Report uu page 63). k Click OK. l The self-signed certificate is now installed on your computer, and SSL/TLS communication is available. How to create a CSR a Click Create CSR on the Certificate page. 8 8 b Enter a Common Name and your information, such as Organization. Note • We recommend that the Root Certificate from the CA be installed on your computer before creating the CSR. • The length of the Common Name is less than 64 byte. Enter an identifier such as an IP address, node name or domain name to use when accessing this printer through SSL/TLS communication. The node name is displayed by default. The Common Name is required. • A warning will pop-up if you enter a different name in the URL than the Common Name that was used for the certificate. • The length of the Organization, the Organization Unit, the City/Locality and the State/Province is less than 64 byte. • The Country/Region should be an ISO 3166 country code composed of two characters. • If you are configuring X.509v3 certificate extension, choose the Configure extended partition check box and then choose Auto (Register IPv4) or Manual. c You can choose the Public Key Algorithm and Digest Algorithm settings from the pull-down list. The default settings are RSA(2048bit) for Public Key Algorithm and SHA256 for Digest Algorithm. d Click Submit. e When the contents of the CSR appear, click Save to save the CSR file to your computer. 140