Brother International Innov-is 4500D Operation Manual - Page 105
Smocking Stitches, Fagoting
View all Brother International Innov-is 4500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
SEWING THE STITCHES Smocking Stitches g Sew the spaces between the straight seams. Use smocking stitches for decorative sewing on clothes, etc. J a Select a straight foot "J". stitch and attach presser b Set the stitch length to 4.0 mm (approx. 3/16 inch) and loosen the upper thread tension to approximately 2.0 (See pages 49 through 50). h Pull out the straight stitch threads. c Pull the bobbin and upper threads 50 mm (approx. 1-15/16 inches). out by d Sew the seams, leaving approximately 10 mm (approx. 3/8 inch) between the 3 seams, then trim excess thread, leaving 50 mm (approx. 1-15/16 inches). Utility Stitches a Fagoting a Approximately 10 mm (approx. 3/8 inch) e Pull the bobbin threads to obtain the desired amount of gather, and then smooth the gathers by ironing them. When there is a space between two fabrics with thread sewn over the space to join the fabrics together, it is called fagoting. Use this stitch when sewing blouses or children's clothes. a Baste two pieces of leaving a space of 4 fabric onto thin paper, mm (approx. 3/16 inch) between the fabrics. a b c f Select or . Memo For details on each stitch, refer to the "STITCH SETTING CHART" at the end of this manual. a 4.0 mm (approx. 3/16 inch) b Paper c Basting stitches b Select or . Memo For details on each stitch, refer to the "STITCH SETTING CHART" at the end of this manual. 93