Brother International Innov-is 4500D Operation Manual - Page 259
Presser Foot Lifter
View all Brother International Innov-is 4500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 259 highlights
This message is displayed when the "Start/Stop" button is pushed and the machine is in embroidery mode, but the embroidery unit is not attached. This message is displayed when you try to recall or save a pattern while no USB media is loaded. This message is displayed when you try to use incompatible media. This message is displayed when you attempt to select a pattern after the USB media in which the pattern is saved has been changed. This message is displayed when an error occurs with the USB media. ERROR MESSAGES This message is displayed while the USB media is transmitting. This message is displayed when the memory is full and a pattern must be deleted. This message is displayed when the "Presser Foot Lifter" button is pushed while the presser foot lever is raised/the needle is lowered. This message is displayed if some malfunction occurs. This message is displayed when you try to sew with a stitch other 8 than a middle needle position stitch while the single-hole Appendix needle plate is installed. This message is displayed when the needle plate is removed with the machine on or when the machine is turned on in the embroidery or embroidery edit mode. 247