Brother International Innov-is 4500D Operation Manual - Page 81
Flat Fell Seam, Pintuck
View all Brother International Innov-is 4500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
SEWING THE STITCHES Flat Fell Seam e Fold the longer seam shorter one, and sew allowance around the the edge of the fold. Use for reinforcing seams and finishing edges neatly. a a Select and attach presser foot "J". a b Sew the finish line, then cut allowance from the side on half of which the the seam flat fell seam will lie. * When the automatic thread cutting and automatic a Wrong side reinforcement stitching are preset, reinforcement stitches will be sewn automatically at the beginning Finished flat fell seam of sewing. Press the "Reverse/Reinforcement Stitch" button to sew a reinforcement stitch and trim the thread automatically at the end of sewing. 3 a a a Utility Stitches b a About 12 mm (approx. 1/2 inch) b Wrong side c Spread the fabric out along the finish line. a Surface Pintuck a Mark along the fabric. the folds on the wrong side of a b a a Finish line b Wrong side d Lay both seam allowances on the side of shorter seam (cut seam) and iron them. the a Wrong side b Turn the only. fabric and iron the folded parts a a a Wrong side a Surface 69