Brother International Innov-is 4500D Operation Manual - Page 38
Setting the Bobbin, CAUTION
View all Brother International Innov-is 4500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
LOWER THREADING d Push the spool cap onto the spool pin as far as possible, then return the spool pin to its original position. e Holding the thread with your hands, slide the thread into the grooves on the thread guide plate. Setting the Bobbin Press → → → in that order to display a video example of the operation on the LCD (see page 22). Follow the steps explained below to complete the operation. a a Thread guide plate f Pass the thread through the thread guide. CAUTION • Use a bobbin thread that has been correctly wound. Otherwise, the needle may break or the thread tension will be incorrect. a • The enclosed bobbin was designed specifically for this sewing machine. If bobbins from other models are used, the machine will not operate correctly. Use only the enclosed bobbin or bobbins of the same type (part code: SA156, (XA5539-151)). a Thread guide g Pass the thread under the pin. thread around the pretension Then pass the disk making sure that the thread is under the pretension disk. a b c a Thread guide b Pin c Pretension disk h Follow steps through 25. g through j on page 24 11.5 mm (approx. 7/16 inch) Actual size This model Other models • Before inserting or changing the bobbin, be sure to press in the LCD, otherwise injuries may occur if the "Start/ Stop" button or any other button is pressed and the machine starts sewing. a Press the "Presser Foot raise the presser foot. Lifter" button to 26