Brother International Innov-is 4500D Operation Manual - Page 106
Tape or Elastic Attaching, CAUTION
View all Brother International Innov-is 4500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
SEWING THE STITCHES c Attach presser foot "J". Align the center the presser foot with the middle of the of space between the fabrics and begin sewing. d Place the tape over the gather, in place with basting pins. and hold it a a a Basting stitches Memo Use a thick thread. d When sewing paper away. is finished, gently tear the Tape or Elastic Attaching a Tape e Select or . Memo For details on each stitch, refer to the "STITCH SETTING CHART" at the end of this manual. f Sew over the tape (or elastic). a Select a straight foot "J". stitch and attach presser b Set the stitch length to 3/16 inch), and loosen 4.0 the mm (approx. upper thread tension to 2.0 (See pages 49 through 50). Memo Be sure that neither automatic reinforcement nor automatic thread cutting is selected. c Sew two rows of straight stitches on the right side of the fabric, then pull the bobbin thread to create the necessary gather. Memo Before sewing the straight stitch, rotate the handwheel and pull up the bobbin thread. Holding the top and bobbin thread, pull a length of thread out from the rear of the machine. (Be sure that the presser foot is raised.) CAUTION Be sure the needle does not strike a basting pin, or any other objects, during sewing. The thread could tangle or the needle could break, causing injury. g Pull out the straight stitch threads. 94