Brother International Innov-is 4500D Operation Manual - Page 35
Lower Threading
View all Brother International Innov-is 4500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
LOWER THREADING LOWER THREADING Winding the Bobbin a Turn the main top cover. power to ON and open the 1 Getting Ready Press → → → in that order to display a video example of bobbin winding on the LCD (see page 22). Follow the steps explained below to complete the operation. b Align the groove in the bobbin with the spring on the bobbin winder shaft, and set the bobbin on the shaft. a b CAUTION • The enclosed bobbin was designed specifically for this sewing machine. If bobbins from other models are used, the machine will not operate correctly. Use only the enclosed bobbin or bobbins of the same type (part code: SA156, (XA5539-151)). 11.5 mm (approx. 7/16 inch) Actual size a Groove of the bobbin b Spring on the shaft c Set the supplemental position. spool pin in the "up" a This model Other models I Using the Supplemental Spool Pin With this machine, you can wind the bobbin during sewing. While using the main spool pin to sew embroidery, you can conveniently wind the bobbin using the supplemental spool pin. 65 a 3, 4 2 9 7, 8 a Supplemental spool pin d Place the spool of thread on the supplemental spool pin, so that thread unrolls from the front. Then push the spool cap onto the spool pin as far as possible to secure the thread spool. a Supplemental spool pin o l 1 a b c a Spool pin b Spool cap c Thread spool 23