Brother International Innov-is 4500D Operation Manual - Page 40
Pulling Up the Bobbin Thread
View all Brother International Innov-is 4500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
LOWER THREADING Pulling Up the Bobbin Thread There may be some sewing applications where you want to pull up the bobbin thread; for example, when making gathers, darts, or doing free motion quilting or embroidery. Memo You can pull up the bobbin thread after threading the upper thread (see "UPPER THREADING" on page 29). e Pull up the bobbin thread, then pass it under the presser foot and pull it about 100 mm (approx. 3-4 inches) toward the back of the machine, making it even with the upper thread. a b a Guide the bobbin groove, following thread through the the arrow in the illustration. * Do not cut the thread with the cutter. * Do not replace the bobbin cover. a Upper thread b Bobbin thread f Replace the bobbin cover. b While holding the upper thread, press the needle position button to lower the needle. a a Needle position button c Press the "Needle the needle. Position" button to raise d Gently pull the upper thread, and a loop of the bobbin thread will come out of the hole in the needle plate. 28